| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Fuel tank: 320.0 L Cooling system: 32.0 L DEF tank: 16.0 L Operating weight: 20611.0 kg Engine model: C7.1 ACERT Emissions: U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 or China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, which are equivalent to Tier 3/Stage IIIA Engine maximum power - SAE J1995: 168.0 kW Engine maximum power - ISO 14396: 165.0 kW Engine maximum power - ISO 14396 (DIN): 165.0 kW Rated net power - ISO 9249/SAE J1349: 144.0 kW Rated net power - ISO 9249/SAE J1349 (DIN): 144.0 kW Bore: 105.0 mm Stroke: 135.0 mm Displacement: 7.01 L Note (1): Rated power at 1800 rpm. Note (2): All non-road diesel engines meeting Tier 4 Interim and Final, Stage IIIB and IV, and Korean Tier 4 emission standards must use only Ultra Low Sulfur Diesel (ULSD) containing 15 ppm (mg/kg) or less sulfur, or biodiesel up to B20 grade blended with ULSD. B20 should meet ASTM D7467 specifiions (biodiesel blend stocks should meet Biodiesel Specifiion, ASTM D6751, or EN 14214). DEO-ULS™ or engine oil meeting ECF-3, API CJ-4, and ACEA E9 specifiions is required. Consult your original equipment manufacturer for more machine-specific fuel recommendations. Note (3) Diesel Exhaust Fluid (DEF) used in Selective alytic Reduction (SCR) systems must meet the requirements of International Organization for Standardization (ISO) Standard 22241. Weights - Waste Handler Operating Weight* 20611.0 kg Operating Weight 20322.0 kg Shipping Weight* 18572.0 kg Shipping Weight 18285.0 kg Note: *Machine features Tier 4 Final/Stage IV emissions reduction technology. Capacity - General Purpose Landfill: 3.1 m³ Capacity - General Purpose: 2.5 m³ Capacity - Performance Series: 2.8 m³ Capacity - Multi-Purpose: 2.0 m³ Capacity - Landfill: 3.1 m³ Bucket Width - General Purpose: 2612.0 mm Bucket Width - Performance Series: 2712.0 mm Bucket Width - Multi-Purpose: 2575.0 mm Bucket Width - Landfill: 2612.0 mm Note: Bucket with teeth and segments. Shoe Type: Dual Grouser Shoe Width - Standard Shoe/Center Hole: 550.0 mm Track Rollers/Shoes - 7 Rollers/38 Shoes - Each Side Track on Ground: 2542.0 mm Contact Area - Standard Shoe/Center Hole: 3.2 m² Ground Pressure* - Standard Shoe/Center Hole**: 62.9 kPa Ground Pressure - Standard Shoe/Center Hole**: 62.0 kPa Grouser Height: 42.0 mm Track Gauge: 1850.0 mm Link Pitch: 202.8 mm Note (1): *Machine with Tier 4 Final/Stage IV emission reduction technology. Note (2): **ISO 16754:2008. Note (3): Ground pressure is calculated based on the operating weight of the machine with a general purpose bucket, teeth and segments. Air conditioning system: This machine's air conditioning system uses the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant, which is equivalent to 1.573 metric tons of CO2. Overall Machine Width Without Bucket: With Standard Tracks - 480 mm (19.7") Shoes 2400.0 mm Overall Machine Width Without Bucket: With Wide Gauge Tracks - 800 mm (31.5") Shoes 2900.0 mm Ground Clearance: 471.0 mm Machine Height - Top of Cab: 3325.0 mm Length - To Front of Tracks: 4943.0 mm Overall Machine Length*: 7001.0 mm Approach Angle, Carry Position: 15° Digging Depth*: 138.0 mm Maximum Flip Angle - Ground Level: 43° Maximum Flip Angle - Carry Position: 50° Bucket Height - Carry Position: 457.0 mm Reach at Maximum Lift 45° Dump*: 1373.0 mm Clearance at Maximum Lift 45° Dump*: 2915.0 mm Maximum Flip Angle - Fully Raised: 52° Maximum Dump Angle at Fully Raised: 53° Entry Angle: 63° Height - Bucket Hinge Pin: 3940.0 mm Overall Machine Height - Bucket Fully Raised: 5885.0 mm Height - Top of Seat with Headrest: 2808.0 mm Height - Top of Exhaust Pipe: 2940.0 mm Ramp Angle: 29° Note: *With General Purpose Bucket and Extreme Duty Teeth. |
){kind=link}