Xinyuan Heavy Industry C80g4 National Four Wheel Excavator

• Customization: Available
• After-sales Service: 12 Months
• Warranty: 12 Months
• Model NO.: C80G4
• Fuel: Gasoline
• Condition: New
• Origin: China

Product Description

Product Description

 

The C80G4 series is a new generation of wheel hydraulic excavators independently developed and manufactured by Xinyuan Heavy Industry. It has been fully upgraded for forestry operation conditions and is a very cost-effective forestry operation equipment.
Product model: XY C75 G4/XYC80
G4 engine: Xinchai 4E30Y41/Yuchai F3065-T480
Engine power: 48kw/2200rpm
Main relief valve set pressure: 22MPa
Curb weight: 6550/6650kg
Bucket capacity: 0.2m3
C75/C80G4 series meets the non-road "National IV" emission standards and has the distinctive characteristics of high efficiency, energy saving, mobility, flexibility and reliability. It has more advantages in municipal maintenance projects, forestry hoisting and rapid repair, etc., and can create higher value for users!
Blowing cooling system -
The unique blowing cooling system can discharge heat from the rear of the cockpit at an ambient temperature of 45°C. It can also provide strong cooling capacity. It meets the cooling needs of the engine and hydraulic system. It always maintains the best working state. The high-temperature airflow is discharged to the rear of the fuselage, which provides better driving comfort.
Hydraulic system
Equipped with electric variable power hydraulic main pump multi-way valve adopts load-sensitive hydraulic system. Through the induction circuit, it detects the load pressure and receives the flow and power change signals to accurately control and distribute the required hydraulic power. The vehicle's compound movements are faster and smoother. The power loss of the hydraulic system is reduced to a greater extent. The system has better controllability and higher production efficiency. The oil temperature of the hydraulic system is reduced and the service life is extended
Body structure
The new upper platform has a more scientific mechanical design. Double Z-shaped main beam structure, large-section C-shaped side beam, and high-strength steel ensure that the upper body meets the use requirements of the entire life cycle. The side-mounted boom design optimizes the overall force structure to make the working device closer to the rotation center and reduce the impact of inertia on the body during rotation. Robot welding, high-quality and more stable welds. Protective rubber rings are configured for the openings of structural parts to prevent pipes, wiring harnesses, etc. from contacting and wearing the structural parts..

 

Product model: C80 G4
Engine model: Xinchai 4E30/Yuchai F30
Engine displacement: 2970/2982mL
Total power/speed: 48kw/2200rpm
Curb weight: 6650kg
Bucket capacity: 0.2m³
Main relief valve set pressure: 22MPa
Slewing set pressure: 21.5MPa
Flow rate: 190L/min
Maximum digging force: 35kN
Climbing grade: 35°
Maximum traction: 35kN
Maximum travel speed: 30km/h
Platform slewing speed: 8.5rpm
Fuel tank capacity: 130L
Hydraulic oil tank capacity: 135L
Boom length: 3600mm
Arm length: 2100mm
A Full length: 6435mm
B Full width: 1980mm
C Full height: 2845mm
D Wheelbase: 2410mm
E Tire model: 195/85-20
F Tire contact width: 430mm
G Wheelbase: 1520mm
H Minimum ground clearance: 230mm
J Bulldozer blade width: 1980mm
K Maximum bulldozer blade rise: 390mm
L Maximum bulldozer blade descent: 45mm
M Standard bucket width: 700mm
Maximum digging distance: 6950mm
Maximum digging depth: 3650mm
Maximum digging height: 7090mm
Maximum unloading height: 5245mm
Front minimum turning radius: 2455mm
Tail minimum turning radius: 1965mm